Scandinavia - Flat-Rolled Products of Iron or Steel (Not Further Worked Than Hot-Rolled) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingScandinavia: Hot-Rolled Steel Products Market 2024
Hot-Rolled Steel Products Market Size in Scandinavia
The Scandinavia hot-rolled steel products market shrank to $X in 2023, declining by X% against the previous year. The total consumption indicated strong growth from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, consumption decreased by X% against 2021 indices. As a result, consumption attained the peak level of $X. From 2022 to 2023, the growth of the market remained at a somewhat lower figure.
Hot-Rolled Steel Products Production in Scandinavia
In value terms, hot-rolled steel products production surged to $X in 2023 estimated in export price. Over the period under review, production, however, continues to indicate resilient growth. The most prominent rate of growth was recorded in 2020 with an increase of X%. Over the period under review, production attained the maximum level at $X in 2021; however, from 2022 to 2023, production failed to regain momentum.
Hot-Rolled Steel Products Exports
Exports in Scandinavia
In 2023, after three years of growth, there was significant decline in shipments abroad of flat-rolled products of iron or steel (not further worked than hot-rolled), when their volume decreased by X% to X tons. Over the period under review, exports, however, showed a relatively flat trend pattern. The growth pace was the most rapid in 2021 when exports increased by X% against the previous year. Over the period under review, the exports attained the peak figure at X tons in 2022, and then shrank in the following year.
In value terms, hot-rolled steel products exports fell to $X in 2023. Total exports indicated a moderate expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports increased by X% against 2020 indices. The pace of growth appeared the most rapid in 2021 with an increase of X%. The level of export peaked at $X in 2022, and then shrank in the following year.
Exports by Country
Sweden was the largest exporting country with an export of around X tons, which resulted at X% of total exports. It was distantly followed by Finland (X tons), comprising a X% share of total exports.
From 2012 to 2023, the most notable rate of growth in terms of shipments, amongst the leading exporting countries, was attained by Sweden (with a CAGR of X%).
In value terms, the largest hot-rolled steel products supplying countries in Scandinavia were Sweden ($X) and Finland ($X).
Sweden, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, among the main exporting countries over the period under review.
Export Prices by Country
In 2023, the export price in Scandinavia amounted to $X per ton, waning by X% against the previous year. Export price indicated a slight increase from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, hot-rolled steel products export price increased by X% against 2020 indices. The pace of growth appeared the most rapid in 2021 when the export price increased by X% against the previous year. The level of export peaked at $X per ton in 2022, and then declined in the following year.
Average prices varied noticeably amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was Finland ($X per ton), while Sweden amounted to $X per ton.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Finland (X%).
Hot-Rolled Steel Products Imports
Imports in Scandinavia
After two years of growth, purchases abroad of flat-rolled products of iron or steel (not further worked than hot-rolled) decreased by X% to X tons in 2023. In general, imports recorded a noticeable reduction. The most prominent rate of growth was recorded in 2017 when imports increased by X% against the previous year. As a result, imports attained the peak of X tons. From 2018 to 2023, the growth of imports failed to regain momentum.
In value terms, hot-rolled steel products imports dropped markedly to $X in 2023. Over the period under review, imports, however, recorded a relatively flat trend pattern. The pace of growth appeared the most rapid in 2017 when imports increased by X%. The level of import peaked at $X in 2022, and then reduced sharply in the following year.
Imports by Country
Sweden represented the main importer of flat-rolled products of iron or steel (not further worked than hot-rolled) in Scandinavia, with the volume of imports amounting to X tons, which was approx. X% of total imports in 2023. Finland (X tons) ranks second in terms of the total imports with a X% share, followed by Norway (X%).
Sweden was also the fastest-growing in terms of the flat-rolled products of iron or steel (not further worked than hot-rolled) imports, with a CAGR of X% from 2012 to 2023. Finland (X%) and Norway (X%) illustrated a downward trend over the same period. From 2012 to 2023, the share of Sweden increased by X percentage points. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Sweden ($X) constitutes the largest market for imported flat-rolled products of iron or steel (not further worked than hot-rolled) in Scandinavia, comprising X% of total imports. The second position in the ranking was taken by Finland ($X), with a X% share of total imports.
In Sweden, hot-rolled steel products imports expanded at an average annual rate of X% over the period from 2012-2023. In the other countries, the average annual rates were as follows: Finland (X% per year) and Norway (X% per year).
Import Prices by Country
The import price in Scandinavia stood at $X per ton in 2023, reducing by X% against the previous year. Import price indicated noticeable growth from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, hot-rolled steel products import price increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 when the import price increased by X% against the previous year. The level of import peaked at $X per ton in 2022, and then contracted in the following year.
Average prices varied somewhat amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Norway ($X per ton), while Sweden ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Norway (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the hot-rolled steel products market in Scandinavia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24103110 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, simply hot-rolled, not clad, plated or coated, in coils
- Prodcom 24103130 - Flat-rolled products of iron or non-alloy steel, of a width . .600 mm, not in coils, simply hot-rolled, not clad, plated or coated, w ith patterns in relief directly due to the rolling process and products of a thickness < 4,75 mm, without patterns in relief
- Prodcom 24103150 - Flat-rolled products, of iron or non-alloy steel, of a width . .600 mm (excluding
- Prodcom 24103210 - Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > .150 mm but < .600 mm and a thickness of . 4 mm, not in coils, without patterns in relief, commonly
- Prodcom 24103230 - Flat-rolled products of iron or non-alloy steel, of a width < .600 mm, simply hot-rolled, not clad, plated or coated (excluding
- Prodcom 24103330 - Plates and sheets produced by cutting from hot-rolled wide strip of a width of .600 mm or more, of stainless steel
- Prodcom 24103340 - Plates and sheets produced on a reversing mill (quarto) of a width of .600 mm or more and wide flats, of stainless steel
- Prodcom 241033Z0 - Hot-rolled flat products in coil of a width . .600 mm, of stainless steel
- Prodcom 241034Z0 - Hot-rolled flat products in coil of a width < .600 mm, of stainless steel
- Prodcom 24103510 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, in coils (excluding products of high-speed or siliconelectrical steel)
- Prodcom 24103520 - Flat-rolled products of high-speed steel, of a width . .600 mm, h ot-rolled or cold-rolled
- Prodcom 24103530 - Flat-rolled products, of tool steel or alloy steel other than stainless steel, of a width . .600 mm, not further worked than hot-rolled, not in coils (excluding organic coated products, p roducts of a thickness < 4,75 mm and products of high-
- Prodcom 24103540 - Flat-rolled products of alloy steel other than stainless, of a width . .600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 4,75 mm (excluding products of tool steel, high-speed steel or silicon-electrical steel)
- Prodcom 24103600 - Flat-rolled products of alloy steel other than stainless, of a width of < .600 mm, not further worked than hot-rolled (excluding products of high-speed steel or silicon-electrical steel)
Country coverage:
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Scandinavia, split by region and country
- Trade (exports and imports) in Scandinavia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Finland
- Norway
- Sweden
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the hot-rolled steel products market in Asia.
This report provides an in-depth analysis of the hot-rolled steel products market in the U.S..
This report provides an in-depth analysis of the hot-rolled steel products market in China.
This report provides an in-depth analysis of the hot-rolled steel products market in the EU.
This report provides an in-depth analysis of the global hot-rolled steel products market.
- Hot-Rolled Steel Products Market
- Cold-Rolled Steel Products Market
- Flat-Rolled Steel Products Market
- Iron Bar Market
- Hot-Rolled Free-Cutting Steel Market
- Hot-Rolled Wire Stainless Steel Rod Market
- Hot-Rolled Round Stainless Steel Market
- Silicon-Electrical Steel Flat-Rolled Product Market
- Hot-Rolled High Speed Steel Bar Market
- Hot-Rolled Silico-Manganese Steel Bar Market