Romania - Flexible Tubes, Pipes and Hoses of Plastics, with a Burst Pressure ≥ 27,6 MPa - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingRomania: Market for Flexible Tubes, Pipes and Hoses of Plastics, with a Burst Pressure ≥ 27,6 MPa 2024
Market Size for Flexible Tubes, Pipes and Hoses of Plastics, with a Burst Pressure ≥ 27,6 MPa in Romania
After six years of growth, the Romanian market for flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa decreased by X% to $X in 2023. In general, consumption, however, enjoyed a remarkable increase. Over the period under review, the market attained the maximum level at $X in 2022, and then declined modestly in the following year.
Production of Flexible Tubes, Pipes and Hoses of Plastics, with a Burst Pressure ≥ X MPa in Romania
In value terms, production of flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa reduced slightly to $X in 2023 estimated in export price. In general, production continues to indicate a strong expansion. The pace of growth was the most pronounced in 2018 when the production volume increased by X%. Over the period under review, production of hit record highs at $X in 2022, and then dropped in the following year.
Exports of Flexible Tubes, Pipes and Hoses of Plastics, with a Burst Pressure ≥ 27,6 MPa
Exports from Romania
In 2023, the amount of flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa exported from Romania contracted slightly to X tons, flattening at 2022. Overall, total exports indicated a buoyant expansion from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports decreased by X% against 2021 indices. The pace of growth appeared the most rapid in 2013 when exports increased by X% against the previous year. The exports peaked at X tons in 2016; however, from 2017 to 2023, the exports remained at a lower figure.
In value terms, exports of flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa soared to $X in 2023. Over the period under review, exports, however, showed a prominent increase. The pace of growth appeared the most rapid in 2013 with an increase of X%. The exports peaked at $X in 2018; however, from 2019 to 2023, the exports stood at a somewhat lower figure.
Exports by Country
Italy (X tons) was the main destination for exports of flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa from Romania, accounting for a X% share of total exports. Moreover, exports of flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa to Italy exceeded the volume sent to the second major destination, Germany (X tons), fourfold. Slovakia (X tons) ranked third in terms of total exports with a X% share.
From 2012 to 2023, the average annual growth rate of volume to Italy totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Germany (X% per year) and Slovakia (X% per year).
In value terms, Italy ($X), Germany ($X) and Slovakia ($X) were the largest markets for flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa exported from Romania worldwide, together accounting for X% of total exports.
Slovakia, with a CAGR of X%, saw the highest growth rate of the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average export price for flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa stood at $X per ton in 2023, jumping by X% against the previous year. Overall, the export price saw a resilient increase. The growth pace was the most rapid in 2013 when the average export price increased by X% against the previous year. The export price peaked at $X per ton in 2018; however, from 2019 to 2023, the export prices stood at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Slovakia ($X per ton), while the average price for exports to Hungary ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to Spain (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Flexible Tubes, Pipes and Hoses of Plastics, with a Burst Pressure ≥ 27,6 MPa
Imports into Romania
In 2023, overseas purchases of flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa decreased by X% to X tons for the first time since 2015, thus ending a seven-year rising trend. Overall, imports, however, posted a measured expansion. The most prominent rate of growth was recorded in 2018 with an increase of X%. Over the period under review, imports of hit record highs at X tons in 2022, and then declined markedly in the following year.
In value terms, imports of flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa amounted to $X in 2023. In general, imports, however, continue to indicate a resilient expansion. The pace of growth was the most pronounced in 2020 when imports increased by X% against the previous year. Imports peaked in 2023 and are likely to continue growth in the immediate term.
Imports by Country
France (X tons), Turkey (X tons) and Spain (X tons) were the main suppliers of imports of flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa to Romania, with a combined X% share of total imports. Italy, Bulgaria, Austria, Poland, China, Hungary, Belgium, Portugal, Greece and Germany lagged somewhat behind, together comprising a further X%.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Portugal (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, France ($X) constituted the largest supplier of flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa to Romania, comprising X% of total imports. The second position in the ranking was held by Turkey ($X), with an X% share of total imports. It was followed by Spain, with an X% share.
From 2012 to 2023, the average annual growth rate of value from France stood at X%. The remaining supplying countries recorded the following average annual rates of imports growth: Turkey (X% per year) and Spain (X% per year).
Import Prices by Country
In 2023, the average import price for flexible tubes, pipes and hoses of plastics, with a burst pressure X MPa amounted to $X per ton, jumping by X% against the previous year. In general, import price indicated a slight expansion from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The growth pace was the most rapid in 2019 when the average import price increased by X% against the previous year. Over the period under review, average import prices attained the peak figure in 2023 and is expected to retain growth in the immediate term.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Germany ($X per ton), while the price for Belgium ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Germany (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for flexible tubes, pipes and hoses of plastics, with a burst pressure u2265 27,6 mpa in Romania. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22212920 - Flexible tubes, pipes and hoses of plastics, with a burst pressure . .27,6 MPa
Country coverage:
- Romania
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Romania
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 mpa in Asia.
This report provides an in-depth analysis of the market for flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 mpa in the U.S..
This report provides an in-depth analysis of the market for flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 mpa in China.
This report provides an in-depth analysis of the market for flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 mpa in the EU.
This report provides an in-depth analysis of the global market for flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 mpa.