Europe - Iron, Steel or Aluminium Reservoirs, Tanks, Vats and Similar Containers - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEurope: Market for Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers 2024
Market Size for Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers in Europe
In 2020, the Europe market for iron, steel or aluminium reservoirs, tanks, vats and similar containers decreased by X% to $X, falling for the third year in a row after two years of growth. Over the period under review, consumption continues to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 with an increase of X%. As a result, consumption reached the peak level of $X. From 2018 to 2020, the growth of the market failed to regain momentum.
Production of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers in Europe
In value terms, iron, steel or aluminium reservoir production rose remarkably to $X in 2020 estimated in export price. In general, production showed a mild downturn. The pace of growth appeared the most rapid in 2017 when the production volume increased by X%. Over the period under review, production reached the maximum level at $X in 2013; however, from 2014 to 2020, production remained at a lower figure.
Exports of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers
Exports in Europe
In 2020, shipments abroad of iron, steel or aluminium reservoirs, tanks, vats and similar containers decreased by X% to X units for the first time since 2016, thus ending a three-year rising trend. Overall, exports, however, saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2019 with an increase of X% against the previous year. As a result, the exports attained the peak of X units, and then dropped slightly in the following year.
In value terms, iron, steel or aluminium reservoir exports shrank modestly to $X in 2020. In general, exports recorded a relatively flat trend pattern. The pace of growth was the most pronounced in 2018 when exports increased by X%. Over the period under review, the exports hit record highs at $X in 2014; however, from 2015 to 2020, the exports remained at a lower figure.
Exports by Country
In 2020, Poland (X units), Italy (X units), Germany (X units), the Czech Republic (X units), Spain (X units) and the Netherlands (X units) represented the major exporter of iron, steel or aluminium reservoirs, tanks, vats and similar containers in Europe, achieving X% of total export. The UK (X units), Portugal (X units), Austria (X units), France (X units), Estonia (X units), Belgium (X units) and Belarus (X units) took a little share of total exports.
From 2012 to 2020, the biggest increases were recorded for the Netherlands (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Italy ($X), Germany ($X) and Poland ($X) were the countries with the highest levels of exports in 2020, with a combined X% share of total exports. The Czech Republic, the UK, the Netherlands, Spain, Austria, France, Portugal, Belgium, Estonia and Belarus lagged somewhat behind, together accounting for a further X%.
In terms of the main exporting countries, the Netherlands, with a CAGR of X%, recorded the highest growth rate of the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The export price in Europe stood at $X per unit in 2020, declining by X% against the previous year. Overall, the export price continues to indicate a mild decline. The most prominent rate of growth was recorded in 2018 when the export price increased by X%. The level of export peaked at $X per unit in 2014; however, from 2015 to 2020, the export prices failed to regain momentum.
There were significant differences in the average prices amongst the major exporting countries. In 2020, amid the top suppliers, the country with the highest price was the UK ($X per unit), while Belarus ($X per unit) was amongst the lowest.
From 2012 to 2020, the most notable rate of growth in terms of prices was attained by Germany (X%), while the other leaders experienced more modest paces of growth.
Imports of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers
Imports in Europe
Iron, steel or aluminium reservoir imports reduced markedly to X units in 2020, which is down by X% on 2019 figures. Overall, imports, however, recorded a relatively flat trend pattern. The pace of growth was the most pronounced in 2017 when imports increased by X% against the previous year. Over the period under review, imports reached the peak figure at X units in 2019, and then fell markedly in the following year.
In value terms, iron, steel or aluminium reservoir imports declined significantly to $X in 2020. Over the period under review, imports, however, continue to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 with an increase of X% against the previous year. The level of import peaked at $X in 2019, and then dropped notably in the following year.
Imports by Country
In 2020, Germany (X units), distantly followed by France (X units), the UK (X units), the Netherlands (X units) and Italy (X units) were the key importers of iron, steel or aluminium reservoirs, tanks, vats and similar containers, together achieving X% of total imports. Sweden (X units), Austria (X units), Norway (X units), Ukraine (X units), Belgium (X units), Romania (X units), Switzerland (X units) and Poland (X units) took a minor share of total imports.
From 2012 to 2020, the most notable rate of growth in terms of purchases, amongst the leading importing countries, was attained by the Netherlands (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) constitutes the largest market for imported iron, steel or aluminium reservoirs, tanks, vats and similar containers in Europe, comprising X% of total imports. The second position in the ranking was held by France ($X), with an X% share of total imports. It was followed by the UK, with an X% share.
From 2012 to 2020, the average annual growth rate of value in Germany stood at X%. In the other countries, the average annual rates were as follows: France (X% per year) and the UK (X% per year).
Import Prices by Country
The import price in Europe stood at $X per unit in 2020, surging by X% against the previous year. Over the period under review, the import price, however, showed a relatively flat trend pattern. The pace of growth was the most pronounced in 2018 an increase of X%. Over the period under review, import prices hit record highs at $X per unit in 2014; however, from 2015 to 2020, import prices failed to regain momentum.
There were significant differences in the average prices amongst the major importing countries. In 2020, amid the top importers, the country with the highest price was Switzerland ($X per unit), while Ukraine ($X per unit) was amongst the lowest.
From 2012 to 2020, the most notable rate of growth in terms of prices was attained by Sweden (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25291110 - Iron or steel reservoirs, tanks, vats and similar containers for gases, of a capacity > .300 litres (excluding compressed or liquefied gas, fitted with mechanical or thermal equipment)
- Prodcom 25291120 - Iron or steel reservoirs, tanks, vats and similar containers lined or heat-insulated, for liquids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291130 - Iron or steel reservoirs, tanks, vats and similar containers for liquids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment, lined or heat insulated)
- Prodcom 25291150 - Iron or steel reservoirs, tanks, vats and similar containers for solids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291170 - Aluminium reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291200 - Containers for compressed or liquefied gas, of metal
Country coverage:
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Isle of Man
- Italy
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- North Macedonia
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Europe, split by region and country
- Trade (exports and imports) in Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- North Macedonia
- Malta
- Moldova
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Liechtenstein
- Isle of Man
- Monaco
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in Asia.
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in the U.S..
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in China.
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in the EU.
This report provides an in-depth analysis of the global market for iron, steel or aluminium reservoir.