Eastern Europe - Moulds for Mineral Materials - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEastern Europe: Market for Moulds For Mineral Materials 2024
Market Size for Moulds For Mineral Materials in Eastern Europe
The East European mould for mineral materials market rose markedly to $X in 2022, increasing by X% against the previous year. Over the period under review, consumption saw a relatively flat trend pattern. Over the period under review, the market reached the peak level at $X in 2020; however, from 2021 to 2022, consumption stood at a somewhat lower figure.
Production of Moulds For Mineral Materials in Eastern Europe
In value terms, mould for mineral materials production amounted to $X in 2022 estimated in export price. The total production indicated perceptible growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2018 indices. The growth pace was the most rapid in 2018 when the production volume increased by X% against the previous year. As a result, production attained the peak level of $X. From 2019 to 2022, production growth failed to regain momentum.
Exports of Moulds For Mineral Materials
Exports in Eastern Europe
In 2022, mould for mineral materials exports in Eastern Europe dropped remarkably to X units, which is down by X% on the year before. In general, exports showed a pronounced slump. The pace of growth appeared the most rapid in 2018 when exports increased by X%. The volume of export peaked at X units in 2019; however, from 2020 to 2022, the exports failed to regain momentum.
In value terms, mould for mineral materials exports reduced to $X in 2022. Total exports indicated tangible growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2015 indices. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. As a result, the exports attained the peak of $X, and then shrank in the following year.
Exports by Country
In 2022, Russia (X units), Poland (X units), Belarus (X units), Ukraine (X units) and Hungary (X units) represented the key exporter of moulds for mineral materials in Eastern Europe, making up X% of total export. It was distantly followed by the Czech Republic (X units), committing a X% share of total exports. Estonia (X units) took a minor share of total exports.
From 2012 to 2022, the biggest increases were recorded for Estonia (with a CAGR of X%), while shipments for the other leaders experienced mixed trends in the exports figures.
In value terms, Poland ($X) remains the largest mould for mineral materials supplier in Eastern Europe, comprising X% of total exports. The second position in the ranking was taken by Hungary ($X), with a X% share of total exports. It was followed by the Czech Republic, with a X% share.
In Poland, mould for mineral materials exports expanded at an average annual rate of X% over the period from 2012-2022. The remaining exporting countries recorded the following average annual rates of exports growth: Hungary (X% per year) and the Czech Republic (X% per year).
Export Prices by Country
In 2022, the export price in Eastern Europe amounted to $X per unit, jumping by X% against the previous year. Over the period under review, the export price showed a prominent increase. The growth pace was the most rapid in 2020 an increase of X% against the previous year. Over the period under review, the export prices reached the maximum in 2022 and is likely to see gradual growth in years to come.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Poland ($X per unit), while Russia ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Poland (X%), while the other leaders experienced more modest paces of growth.
Imports of Moulds For Mineral Materials
Imports in Eastern Europe
In 2022, after two years of growth, there was significant decline in supplies from abroad of moulds for mineral materials, when their volume decreased by X% to X units. Overall, imports showed a abrupt curtailment. The most prominent rate of growth was recorded in 2021 when imports increased by X%. As a result, imports attained the peak of X units, and then contracted dramatically in the following year.
In value terms, mould for mineral materials imports shrank dramatically to $X in 2022. In general, imports saw a relatively flat trend pattern. The pace of growth was the most pronounced in 2017 with an increase of X% against the previous year. The level of import peaked at $X in 2021, and then reduced notably in the following year.
Imports by Country
Russia was the major importing country with an import of about X units, which resulted at X% of total imports. Ukraine (X units) ranks second in terms of the total imports with an X% share, followed by Poland (X%), Romania (X%), the Czech Republic (X%) and Hungary (X%). Belarus (X units) followed a long way behind the leaders.
From 2012 to 2022, average annual rates of growth with regard to mould for mineral materials imports into Russia stood at X%. At the same time, Hungary (X%) displayed positive paces of growth. Moreover, Hungary emerged as the fastest-growing importer imported in Eastern Europe, with a CAGR of X% from 2012-2022. By contrast, Poland (X%), Romania (X%), Ukraine (X%), the Czech Republic (X%) and Belarus (X%) illustrated a downward trend over the same period. Poland (X p.p.), Hungary (X p.p.) and Romania (X p.p.) significantly strengthened its position in terms of the total imports, while Belarus and Russia saw its share reduced by X% and X% from 2012 to 2022, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, the largest mould for mineral materials importing markets in Eastern Europe were Russia ($X), Poland ($X) and the Czech Republic ($X), together accounting for X% of total imports. Romania, Ukraine, Hungary and Belarus lagged somewhat behind, together comprising a further X%.
Hungary, with a CAGR of X%, saw the highest rates of growth with regard to the value of imports, among the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in Eastern Europe stood at $X per unit in 2022, surging by X% against the previous year. Import price indicated prominent growth from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, mould for mineral materials import price increased by X% against 2020 indices. As a result, import price reached the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Poland ($X per unit), while Belarus ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Romania (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for mould for mineral materials in Eastern Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735060 - Moulds for mineral materials
Country coverage:
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Eastern Europe, split by region and country
- Trade (exports and imports) in Eastern Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Belarus
- Bulgaria
- Czech Republic
- Estonia
- Hungary
- Latvia
- Lithuania
- Moldova
- Poland
- Romania
- Russia
- Slovakia
- Ukraine
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for mould for mineral materials in Asia.
This report provides an in-depth analysis of the market for mould for mineral materials in the U.S..
This report provides an in-depth analysis of the market for mould for mineral materials in China.
This report provides an in-depth analysis of the market for mould for mineral materials in the EU.
This report provides an in-depth analysis of the global market for mould for mineral materials.